Our compactors are Chute-fed, fully automatic, hydraulically operated refuse compactors operated by a single cylinder. Compacted refuse can be extruded into individual plastic bags or reusable 2 cubic yard containers.
A digital sensor controls operation of the machine, allowing for no idling time when empty. Service can be performed through an access door which electronically remains locked while in use. Cycle time is 30 seconds and can handle 1,500 lbs./hour.
The compactor body is constructed out of 3/8”plate steel. The extrusion nozzle is constructed out of heavier 1/2” plate steel with a 1/4” impact plate.
Our compactors are available in different configurations. For example our hopper can be turned 90 degrees due to certain field conditions.
The 1830 Series Trash Compactors are normally installed in street level trash rooms and used in conjunction with a trash chute system in Hi Rise buildings. Operation is automatic, with the unit being activated by an electric eye which senses trash in the loading hopper. The units can also be hand fed. These units are typically used with two cubic yard compaction containers which, when full, are wheeled outside for pick-up by a commercial trash service. The unit automatically shuts down when the container is full.
The Gobbler Series Trash Compactors are bag packers normally installed in below grade trash rooms, used in conjunction with a trash chute system in Hi Rise Apartment Buildings. The units can also be hand fed. The unit compacts and extrudes trash into heavy duty bags. Single or multiple bags are available. Using the multiple bag system, the unit will compact and extrude up to 500 lbs. of trash before bag removal is required. This system is ideal for times when the machine may be unattended, such as over weekends, etc. Operation is completely automatic, being activated by an electric eye which reacts to the presence of trash in the hopper. The system automatically shuts down when the bag is full.